Safe Cover Trench & Streetworks Covers – Rigid, Versatile, Lightweight – Special Prices!

Get Special Deals on Safe Cover Today

CONTACT CSP

VIEW PRODUCT INFORMATION SPECIFICATIONS SAFE COVER 16/12

VIEW PRODUCT INFORMATION SPECIFICATIONS SAFE COVER 12/8

 

Compliant to AS3996 in either size, these slip resistant, lightweight and sturdy boards are made from glass-reinforced composite in the UK to the highest standards.

 

Australia-wide Delivery

Easy to Stack, Store & Transport

Chamfered Edges

For Pedestrian or Vehicle Traffic  to 2Tonne Distributed Weight.

 

Available in two sizes, each Safe Cover can be used to protect pedestrians from potential trip or fall hazards, cracked concrete surfaces, open trenches, unsealed utilities pits, or pot hole issues.  For vehicle carriageways, our clients have used them as driveway boards, and to cover temporary road works or streetworks areas that may pose a threat to driver safety or the potential of vehicle damage.  Regardless of the situation, our Safe Covers make it simple to safeguard all stakeholders when used appropriately.

Safe Cover 16/12 –

  • Dimensions 1600x1200mm
  • Total Weight 33kg
  • Special Price $295 + GST each.

Safe Cover 12/8

  • Dimensions 1200x800mm
  • Total Weight 17.5kg
  • Special Price $130 + GST each.

Neil Cuthbert, Managing Director of Civil Safety Products, explains:

“Oxford Plastics design and manufacture high grade safety equipment for a variety of construction and risk- reducing purposes.  Where some safety products (made by different companies) may not meet Australian Standards and can be of poor quality, we chose the Oxford Plastics UK products because they are durable, lighter than steel plates, stronger than wood boards, and obviously more impervious than cheaper and generally inferior imports.  Our products can be reused time and time again, and the underside of the Safe Cover boards also feature a ribbed framework for added strength.  Moving them between job sites is straightforward as well – a ute, small trailer or large sized wagon and no more than two people is all that is required.  You simply can’t achieve such a quick and easy transition and fitting process with steel plates.  Aside from the excessive weight of the steel, there is also enormous possibility for lifting injuries to occur.  Our Australian WHS Regulations demand that safety should never be compromised, and with our CSP products you’ll feel assured that we have solutions to meet exacting standards onsite.” 

WATCH OUR DEMONSTRATION VIDEO:

SPECIAL PRICES AVAILABLE NOW FOR A LIMITED TIME

CONTACT CSP TODAY

/0 Comments/by

Civil Safety Products – The Best Money Making Road Plates in Australia – Cost-effective, Safer, Quicker Worksite Safety Measures

SPECIAL PRICES – LIMITED TIME ONLY

CONTACT CSP TODAY

Composite Road Plates in Australia are available from CSP.  Designed in the UK, they’re a huge hit all over the world!

Utility Contractors have found a cost-effective and safer way to cover trenches – enter the easy-to-use and install Composite Road Plate manufactured by Oxford Plastics, and distributed by Civil Safety Products in Australia.

US Company, Anchor Constructions’ Vice President, Dan Buckley, calls the LowPro 23/05 Road Plate “Pure money”.

And where does his opinion come from?

Dan Buckley says:

“I gain anywhere from 45 minutes to 1 hour 15 minutes more a day because I’m not having to use my excavator or boom trucks to lift the usual (road works) steel plates to get them in place.”

Due to its modular design, this superior Composite Road Plate (available from Civil Safety Products in Australia) is light enough to be installed by just two people – and no heavy lifting equipment is required.

Contractors can truly save time and money with the composite road plates compared to steel plates.

Buckley says, “There’s no hot or cold asphalt mix on the edges as these (plates have) tapered edges.”   This eliminates yet another cost when using these high-quality trench covers.  Additionally, the tapered edges provide excellent grip to the road surface below.

Use our Road Plates and eradicate noise complaints as well

The LowPro Road Plate has anti-skid and sound dampening edges which means no ‘clanging’ or ‘banging’ as vehicles traverse over them.   You can reduce the prospect of noise liability claims by using a product that was designed to be fit-for-purpose, and is also compliant with Australian Standards.  The LowPro Road Plate is easy to secure with recessed bolt holes and lateral lock pins that sit within the trench to stop lateral movement, they’re easy to stack and transport, and the need for traffic management personnel is significantly reduced when it comes to installation and removal.

Please Note:  Our Civil Safety Products Road Plates are also approved for use by Road Authority bodies throughout Australia – including VicRoads (Victoria), Roads and Maritime Services (NSW), Transport and Main Roads (QLD), Main Roads (WA), and the Department of Planning, Transport and Infrastructure (DPTI – South Australia).

GET SPECIAL PRICE DEALS NOW at Civil Safety Products

Click on the links below for more information and view more product information throughout the CSP website

Product Description Road Plate 23/05
Product Description Road Plate 15/05
See our Full Range of Civil Safety Products

 

Neil Cuthbert, Managing Director of Civil Safety Products maintains, “We have seen time and again that Australian contractors prefer to use our modular road plates in suburban areas, and particularly where traffic restrictions and space issues exist.  Their composite nature also negates the kinds of historical steel road plate orientated noise complaints that roadworks companies generally have to deal with.  The LowPro range we distribute creates better site safety and compliance conditions.  It’s not just the contractors that are happy with our products – it’s the nearby residents and property owners as well.  It’s all win-win with Civil Safety Products.”

ADDITIONAL BENEFITS:

The LowPro 23/05 Road Plate (from Civil Safety Products in Australia) covers trenches up to 1200mm in length and is suitable for 44T vehicles to drive over.

As part of our LowPro range, there’s a trench cover solution to suit your needs.

Our quality Composite Trench Cover Designs have specific purpose-driven capacities to span trenches on footpaths, driveways and specific trenches up to 1200mm – all manufactured in the UK by Oxford Plastics.

 

Civil Safety Products – Who are we and why should you trust us?

Civil Safety Products Pty. Ltd. is a Registered Australian Company, established in 2014.  Our company is owned by Construction Industry Experts who understand, first-hand, the needs and growing concerns surrounding WHS/OHS compliance.  In answer to sub-standard worksite safety barriers and trench covers flooding the market (in Australia and New Zealand) we provide a suite of products that are lightweight, sustainable, environmentally-friendly, and interactive.  And the best thing is, they’ll save you money, stress and give you assurance that Australian roadworks authorities have designated our Australian Road Plates compliant and easy to install.

CONTACT US AT CIVIL SAFETY PRODUCTS FOR MORE INFORMATION

CALL US ON 0498 001 455

Watch this video and hear why Dave Balkan (CEO of New York’s largest sewer and water main contractors) recommends our Composite Road Plates.

SPECIAL PRICES AVAILABLE

Contact Us Today at Civil Safety Products and ask us about Australia-wide Delivery of our superior product range.

/0 Comments/by

LowPro Trench Covers – Lightweight, High Quality Temporary Safety Solutions from Civil Safety Products in Victoria

CONTACT US FOR SPECIAL 2020 PRICES ON LowPro TODAY

Civil Safety Products

Leading the way in Australian Civil Safety Solutions and Equipment. 

Our LowPro Covers:

  • Come in three different sizes
  •  Are reusable
  •  Can be stacked, stored and transported, and
  •  Require manpower of only two people and a ute!

 

CLICK HERE TO WATCH OUR LowPro Range Video

       

Our high visibility safety Trench Covers are solid, with a glass-reinforced high quality composition, and the LowPro 12/8 and 15/10 have replaceable and flexible edges for a firmer fit. 

Weighing no more than 42kg (for the larger version), choose from the three available models, and feel assured that the UK designed and manufactured products come with compliance to AS3996 and the WHS Act (2012).

Traffic management and worksite safety situations demand robust equipment that will withstand inopportune movement and carry the specified weight.

The beauty of the LowPro range is that they provide stability, without bolting, and you’ll find the LowPro 12/8 and LowPro 15/10 have been designed with in-built gas vents and probe holes as well.  With a load rating of 3.5 Tonne, the LowPro 15/10 is tough enough to withstand considerable weight too.

Our Civil Safety Products LowPro range is suitable for a wide range of situations, for example:
• Retail Stores, Supermarkets and Cleaning companies use them to address temporary holes in floors and damaged tile or pavement areas
• Civil and Construction site workers position them to cover safety hazard holes, small pits and various other no-go zones – such as Mining, Telcoms, Gas, Water and Electrical companies might encounter
• Residential Home Builders use them for temporary driveway access where a crossover may have been removed, damaged, or is yet to be constructed
• Commercial Builders may use them to cover areas where concrete cutting has occurred, and prior to replacement pouring
• Schools can protect all in-house and visiting persons from dangerous trip and fall spots, and
• Shire Council workers put them in place to ensure any ground works in-progress have a bright yellow, flat safety cover that unmistakably says ‘beware’ – keeping pedestrians and workers safe.

SPECIAL PRICING AVAILABLE NOW for a limited time

CALL US at Civil Safety Products for LowPro 11/11, LowPro 12/8 and LowPro 15/10 Temporary Trench, Pot Hole & Driveway Board Covers.

They’re simple, quick and effective safety solutions with multiple applications for onsite and public safety.

 

“At Civil Safety Products we have Trench Covers and Road Plates (for broader trenches) for a variety of applications, and we’re more than happy to provide advice, and site visits if required (in some situations) to ensure you get the best possible solutions to meet your necessary site safety obligations.  There is never any reason to compromise on safety or compliance, and we can equip you with both of these vital elements when you’re planning your next construction project.  We’re here to supply what you need, quickly and efficiently, and help you reduce your onsite risk for workers, and extended risk factors that may be an issue for passing traffic and pedestrians.”  Neil Cuthbert, Civil Safety Products, Australia

 

SEE THE FULL LIST OF ADVANTAGES & SPECIFICATIONS of the LowPro Range NOW

 

Stock Available with Australia-wide delivery to your worksite, retail store, school, warehouse or head office.

CONTACT US

Download our Free Trench Covers Guide

 

FIND OUT MORE
– How to place an order
– Applications Chart for all Civil Safety Products
– Contact Us 

Reduce Your Risk with the
Best Civil Safety Products on the Australian Market
TODAY

 

Civil Safety Products is also the leading Australian stockist of:

Safety Ramps

Safety Barriers

Temporary Manhole Covers

Road Plates

Portable Wheelchair Access Ramps / Disabled Access Ramps

Pedestrian Safety Measures

Kerb Ramps / Gutter Ramps

Streetworks Covers,

& More.

 

/0 Comments/by

Trench Covers Guide – Download for FREE

Which Trench Covers do I need?

At Civil Safety Products in Australia, we take our commitment to keeping construction sites safe very seriously.  Trench Covers are essential for maintaining accessibility to particular areas whilst you work – so it’s important to get it right, and ensure that you source the appropriate safety products for your company’s needs.
On a construction site your trench and safety cover usage will obviously vary according to the site, and, where Trench Covers are concerned, there are certain fulfilment requirements that need careful consideration before placing your order with us at CSP.  These important factors may include:

What size trench are you covering?

An obvious one, perhaps – but it’s wise to make sure that the Civil Safety Products Trench Covers you buy are large enough to safely cover the hole or holes.  Our LowPro® Trench Cover range includes options suitable for between 200mm to 1200mm wide trenches (depending on your needs).

 

Calculate the appropriate weight bearing allowance for your Trench Covers

Does your Trench Cover need to support heavy vehicles, general road traffic, or just passing pedestrians?  We offer several solutions.
Read the specifications of each of our CSP Trench Covers (below) to select those that can support either 3.5 tonne vehicles, 2 tonne vehicles, and/or motor scooters of up to 350kg.

 

Product Description and Specifications for LowPro 12/8
Product Description and Specifications for LowPro 15/10
Product Description and Specifications for LowPro 11/11
Product Description and Specifications for LowPro Safe Cover 12/8
Product Description and Specifications for LowPro Safe Cover 16/12
Product Description and Specifications for Road Plate 23/05
Product Description and Specifications for Road Plate 15/05

Composite Trench Covers Vs Steel Plates – Our Composite Products Win Hands-down

All of the Trench Covers in our LowPro® range are composite and formed using environmentally friendly practises – which means they’re lightweight, easy to manoeuvre and lay into position.  CSP’s Trench Covers are designed and manufactured with construction workers in mind, so they all weigh between 13 and 33kg – without compromising on strength.  They can therefore be positioned quickly by just two people, and without the need for specialist lifting equipment – making setting up or clearing a construction site easier, more cost-effective and time-efficient for your team.

Health & Safety are CSP Priorities at every stage

Our Trench Covers, designed and manufactured in the UK by Oxford Plastics, come with a range of high-quality features, such as anti-slip and anti-trip technology.  Naturally the anti-slip features ensure that the boards remain firmly in place.

They’re also compliant with Australian Standards 3996 and 1428.

Reduce Your Risk With Civil Safety Products

There is no compromise on quality at Civil Safety Products, and that’s why we’ve established an Australia-wide reputation for stocking and distributing the most sought-after, premium products that outsell and undeniably outlast cheap imports.

Weigh up the benefits in our table below

To help summarise the above, we’ve created a handy infographic to help you quickly identify which of our CSP Trench Covers are best-fit solutions for you.

DOWNLOAD A PRINTABLE PDF OF THE TRENCH COVERS GUIDE CHART – CLICK HERE

CSP Trench Covers Guide PDF

Use our Trench Cover Guide to choose the correct option, and contact us to place your order today.

 

Please Note: Our Civil Safety Products Road Plates are also approved for use by Road Authority bodies throughout Australia – including VicRoads (Victoria), Roads and Maritime Services (NSW), Transport and Main Roads (QLD), Main Roads (WA), and the Department of Planning, Transport and Infrastructure (DPTI – South Australia).

Reducing your risk and providing AS product options to keep your company’s worksite safe, no matter what industry you work in, is our primary goal at Civil Safety Products.

 

GET WHAT YOU NEED WITH AUSTRALIA-WIDE DELIVERY

ORDER YOUR TRENCH COVERS, SAFE COVERS & ROAD PLATES FROM CIVIL SAFETY PRODUCTS NOW

 

 

 

 

 

/0 Comments/by

Composite Road Plates from Civil Safety Products – Whisper Quiet, Reusable and Affordable Quality

The new Composite Trench Cover and Composite Road Plate products, designed and manufactured by Oxford Plastics in the UK, are a quiet alternative to the loud, clanging steel plates that are commonly used on civil construction worksites and roadways.

Noise pollution is a pertinent issue for construction, public works and utility companies in cities throughout Australia.  Because of this, disruptive works are often limited to day-time hours – but the annoying metal clanging noises don’t stop at the end of the day.  Steel plates, used on worksites to cover trenches and hazardous areas, spread discontentment and cause complaints amongst residents and local governments as they’re loud both day and night – whenever vehicles drive over them.

Now contractors can say goodbye to the clang of steel plates by using Civil Safety Products’ composite LowPro Road Plate.  The Civil Safety Products Plate has none of these problems as it is virtually silent through all processes – from installation, during worksite placement, and through to being dismantled.

In addition to lowering noise pollution, our Composite Road Plates provide a cheaper alternative to steel plates as they require no heavy lifting equipment, no expensive and time-consuming transportation, no extended traffic management hours, and no asphalt cold mix.  They’re also easily stored in a stillage and they pose far fewer safety risks to operators.

Civil Safety Products’ Road Plate is made from several modules – or inner sections – that clip together and adapt to the bumps and angles of the road.  The innovative drop pins in this advanced product sink into the trench to prevent lateral movement caused by overhead traffic.  In simple terms, once the composite Road Plate is properly installed it will not bounce or move out of place.

Steel plates, as they are made from one flat sheet, do not adapt to cambers in the road.  Subsequently, they are prone to rock and bang against the asphalt.  The steel can even rock from side to side if it is not adequately installed, exposing the trench underneath.

Avoid loud steel plates entirely by using the Composite Road Plate.

 

So what are the benefits?

  • The Civil Safety Products Road Plate is shaped like a large speed bump and comes with ramped rubber edges.  This allows vehicles to smoothly and silently drive over the cover as the rubber edges absorb noise and vibrations.  Road works and street works contractors who frequently receive noise complaints can therefore continue working without this problem.
  • The Civil Safety Products Road Plate covers 1200mm wide trenches and takes the weight of a 44 tonne vehicle, meaning that it can be used in residential or commercial high traffic areas.
  • The natural slope of the composite plate and high-vis yellow design looks and acts like a speed bump to slow traffic down
  • Worksites remain safer and quieter, and residents can sleep again at night
  • This modular LowPro Road Plate solution can be clipped together until the desired width is achieved to cover the trench
  • The Civil Safety Products Road Plate is also part of the composite trench cover range, this includes options for 200mm to 1200mm
  • All products in the range are manufactured to Australian Standards in the UK by Oxford Plastic Systems

Reduce your risk and your worksite costs also with these added benefits:

  •  No heavy lifting equipment is required – easy two person lift and installation process, and safer to manoeuvre (particularly in comparison to steel plates)
  •  Traffic management issues are reduced significantly
  •  No asphalt cold mixing to the edges, and they’re
  •  Easy to transport and store – 15 metres of plates can be carried on one ute and plates may be stacked for storage.

Please Note:  Our Civil Safety Products Road Plates are also approved for use by Road Authority bodies throughout Australia – including VicRoads (Victoria), Roads and Maritime Services (NSW), Transport and Main Roads (QLD), Main Roads (WA), and the Department of Planning, Transport and Infrastructure (DPTI – South Australia).

 

Contact us at Civil Safety Products Today

 

We have high quality safety solutions to simplify your operational procedures and increase your jobsite safety practices.

 

Click on the links below for more information and view more product information throughout our website

Product Description Road Plate 23/05

Product Description Road Plate 15/05

Video Case Study Demonstration

See our Full Range of Civil Safety Products

/0 Comments/by

Visit Civil Safety Products at the National Construction Equipment Convention in Sydney Next Week

Civil Safety Products will be at the NCEC

15th – 17th November

See our Superior Safety Product Showcase – featuring our UK Manufactured Composite Trench Covers, Composite Road Plates, Safety Barriers, Ground Protection Mats & more!

 

CSP has partnered with Oxford Plastic Systems as their KEY AUSTRALIAN DISTRIBUTOR, and you can find us at the Sydney Showgrounds, with demonstration models of our robust safety equipment.

 

Come and speak to our CSP reps and Oxford Plastics experts.  You’ll find solutions to safeguard your worksite and gain sound advice on what our products are designed to do.

 

Discover a range of jobsite safety barriers and covers that are specifically designed with worker and pedestrian safety in mind, built from light-weight materials that last!

 

Where:  The National Construction Equipment Convention 2018 – Stall 007

View:  The latest in traffic and pedestrian safety products.  They’re reliable, tested to Australian Standards and easy-to-use.

When:   15th – 17th November, 2018

 

CONTACT US NOW

And watch out for us at next week’s Sydney Convention.

Click on the headings below to find out more about some our safety solutions.

 

Composite Trench Covers                                                                                     Composite Road Plates



 

 

 

 

 

 

 

Wheelchair Ramps                                                                                                              Safety Barriers

 

 

 

 

 

Reduce Your Risk

with Civil Safety Products

 

/0 Comments/by

Safety Goes on Tour! Civil Safety Products News.

Safety goes on tour!

This November, CSP, as the #1 distributor of safety products manufactured by Oxford Plastic Systems, is attending the National Construction Equipment Convention 2018, to bring you the latest in traffic and pedestrian safety products.

Oxford Plastics is continually innovating with new products, and so this Spring they’ve teamed up with us as their Key Distributor in Australia for the NCEC 2018, to be held in Sydney from the 15th to the 17th November.

Click an image below to learn more about Oxford Plastics’ and Civil Safety Products’ equipment range, and contact the CSP team to book a bespoke training day today!

CONTACT US NOW

And watch out for us at the upcoming Sydney Convention.

Composite Trench Covers                                                                                              Composite Road Plates



 

 

 

 

 

 

 

Wheelchair Ramps                                                                                                                          Safety Barriers

 

 

 

 

 

Above all…. we want to Reduce Your Risk

 

/0 Comments/by

10% Off EOFY Sale Ends 30th June – Civil Safety Products Last Chance to SAVE. NEW Cable Protectors coming soon.

WORK SAFE & WORK SMART

Pack a Pallet of Civil Safety Products & Save $

Our Super Special Offer on Civil & Construction Industry Safety Equipment 

Expend your remaining budget for this End Of Financial Year and call us to arrange a full pallet of same or mixed Civil Safety Products (excluding Cable Protectors), and we’ll give you a 10% Discount.    *Conditions Apply

Reduce Your Risk

with CSP’s
Quality Equipment that will last &
Keep your workers & public passers-by safe.

Our current range of tough and tested safety equipment, is designed and manufactured in England, by Oxford Plastic Systems.

PLACE YOUR ORDER TODAY

 

FEATURED PRODUCTS INCLUDE:

CSP Safegate Barriers 

PROTECTION FOR MANHOLE REPAIR SITES, CABLE LAYING, TEMPORARY EXCAVATIONS, TRIP HAZARDS, WET FLOOR AREAS & CLEANING ZONES

SEE THE FULL LIST OF ADVANTAGES & SPECIFICATIONS of the Safegate Barrier NOW

Worksite areas need protecting and for compliance to WHS. The pictures below were at a site left by Civil Drainage personnel for the weekend.  Obvious dangers exist for passing vehicles, pedestrians and animals alike.  Our Safegate Barrier system could have been quickly and easily deployed, making for safety and high visibility.

The lightweight Safegate Barrier is now approved for use across the board, by the APA Group’s network of employees in the field.

SAFEGATE BARRIER BENEFITS:

• Modular design featuring 4 gate sections per unit with hinged clips for easy assembly – total length 3000mm
• Easy to transport and carry – 10kg per unit – flat pack transport or stand upright in a ute.
• Integral Locking Clamps for stability – with flexibility to join several units together
• Made from HDPE – 100% Recyclable.
FIND OUT MORE

An even more robust option is the

CSP Avalon Barrier

When you need something more substantial to provide a Safety Barrier, such as may be the case in the images above, CSP also supplies the easy-to-use and transport Avalon Barrier.  Attach warning or company signage and stand upright (with its secure and detachable Hi-vis ClearPath feet).  Each unit is blow moulded as a single piece, and constructed from tough, high-density polythene (HDPE).

AVALON BARRIER BENEFITS:

  • Prefect for Event Management, vehicle restriction zones, pedestrian block-off areas, and general warning notification about areas that are unsafe to enter
  • Dimensions:  Length 2000mm x Height 1000mm
  • Weight per panel 5kg only, and 11kg with 2 Clear Path Feet
  • Colour:  Orange
  • Stable and secure with lockable connectors for simple configuration onsite.

 

At Civil Safety Products in Australia, our Safety Barriers are available now for order, and our EOFY 10% Discount applies to full pallet orders only.  For safe installation, protection for trip hazards, pits and trenches, check out our entire range of safety products TODAY.  Safety Compliance is compulsory and our superior products are built to last!

FIND OUT MORE  ABOUT THE AVALON BARRIER

Civil Safety Products in Victoria is Australia’s Leading Distributor of Oxford Plastic Systems.

Contact Us TODAY and we’ll arrange delivery anywhere in Australia and New Zealand.

 

Pack a Whole Pallet & Save 10

Offer only available until 30th June, 2018.

 

PLEASE NOTE:  CSP NEW PRODUCT RELEASE – CABLE PROTECTOR COVERS – COMING SOON! (No discounts apply)

–  Available in 2, 3 & 5 Channel versions
–  Hinged Lids for ease-of-use
–  Cable & Hose Protection with Heavy-Duty Interlocking Connectors & a Flexible Modular Design
–  Our Moulded Cable Protectors are designed for the temporary protection of, both, assets from damage, & pedestrians from trip hazards
–  The bodies of these rugged Cable Protectors are manufactured from a combination of new and recycled rubber, with tough hinged lids of flexible runner/plastic composite in hi-vis yellow.

TALK TO US AT CSP TODAY FOR MORE INFORMATION

Reduce Your Risk with the
Best Civil Safety Products on the Australian Market
TODAY
Civil Safety Products is the leading Australian stockist of Trench Covers, Temporary Manhole Covers, Road Plates, Driveway Boards, Trip Hazard Covers, Pedestrian Safety Measures Covers, Gutter Ramps, Safety Barriers, Streetworks Covers, Roadworks Safety Products, and EnduraMats (Temporary Ground Protection Mats).

WORK SAFE & WORK SMART WITH CSP

CONTACT US

 

FIND OUT MORE

How to Place an Order

Application  Uses for all Products

 

/0 Comments/by

10% Off EOFY Sale Civil & Safety Products Super Safety Special Offer

Pack a Pallet of Civil Safety Products & Save $

*Conditions Apply

CSP is your Civil & Construction Industry Equipment Specialist

Reduce Your Risk with
Quality Equipment that will last &
Keep your workers & public passers-by safe

Expend your remaining budget for this End Of Financial Year and call us to arrange a full pallet of same or mixed Civil Safety Products, and we’ll give you a 10% Discount.
Choose from our range of tough and tested safety equipment, designed and manufactured in England, by Oxford Plastic Systems.

Download our Brochure for all available products &
PLACE YOUR ORDER TODAY

 

FEATURED PRODUCTS INCLUDE:

CSP Supagrip Safekerb Safety Ramp

• Conforms to AS1428:1
• Designed for Access & Mobility – particularly for streetworks footpath closures, trip zones, disability access & more.
• Weight 10 kg
• Size – 1282mm x 760mm
• Adaptable to a variety of kerb or step heights up to 160mm
• Anti-slip surface
• Two raised sides
• Weight tested to 350kg.
FIND OUT MORE

CSP Trench Covers – LowPro 12/8, LowPro 11/11 & LowPro 15/10

• Conform to AS3996 for load rating & slip resistance
• Comply to the Work Health & Safety Act (2012)
• Adjust to cambers in the road or pathway
• Replaceable edges (for LowPro 12/8 & LowPro 15/10)
• Self-weighted & stable without bolting, reducing unwanted movement, &
• LowPro 12/8 & LowPro 15/10 have gas vents & probe holes in-built.

At Civil Safety Products in Australia, our most popular trench cover is the LowPro 12/8 and its innovative flexi-edge allows safe installation and protection over trip hazards, pedestrian walkway concrete damage areas and small pits.  It’s no slouch in area capacity either, as it is specifically designed to cover a 700mm trench, and the LowPro 15/10 will safely span a hole measuring up to 900x1200mm.  They are also shock resistant.

 

 

FIND OUT MORE  ABOUT THE LOWPRO RANGE

 

 

CSP Road Plates

 

Civil Safety Products has two sizes of Road Plates.

Both the Road Plate 23/05 & Road Plate 15/05 should be fitted with End Plates that must be bolted down for safety compliance. Both plate sizes are approved for use on both Victorian, Queensland, SA and NZ roads.

Two Flexi-Edge Rubberised Flaps for each inner plate section come with your plate (replacement parts are available).

TALK TO US TODAY about how and where you intend to use your Road Plates, and we’ll explain the best configuration and product choices to suit your situation.

ROAD PLATE 15/05 – More Information

ROAD PLATE 23/05 – More Information

Civil Safety Products in Victoria is Australia’s Leading Distributor of Oxford Plastic Systems.

We have stock available NOW

Contact Us TODAY and we’ll arrange delivery anywhere in Australia and New Zealand.

 

Pack a Whole Pallet & Save 10%

Offer only available until 30th June, 2018.

 

PLEASE NOTE:  CSP NEW PRODUCT RELEASE – CABLE PROTECTOR COVERS – COMING SOON! (No discounts apply)

 

Reduce Your Risk with the
Best Civil Safety Products on the Australian Market
TODAY
Civil Safety Products is the leading Australian stockist of Trench Covers, Temporary Manhole Covers, Road Plates, Driveway Boards, Trip Hazard Covers, Pedestrian Safety Measures Covers, Gutter Ramps, Safety Barriers, Streetworks Covers, Roadworks Safety Products, and EnduraMats (Temporary Ground Protection Mats) – from Oxford Plastic Systems in the UK.

CONTACT US

 

FIND OUT MORE

How to Place an Order

Application  Uses for all Products

 

 

/0 Comments/by

Steel Plate Alternatives Vs Civil Safety Products LowPro Trench Covers & Safegate Barrier

Read Updates from Trenchless Australasia – We’re on top of Trench Cover Safety with the Australian Pipeline & Gas Association Magazine.

Civil Safety Products is proud to be an APGA Member, and present regular information to this association throughout the year.

Australian Civil Safety Solutions and Equipment are our forte, and our latest published article features comparative data to help our readers understand the benefits of using our LowPro Temporary Trench Covers, rather than the heavy and cumbersome Steel Plate alternatives that some industries still use. 

Why are our safety pot hole, ditch, trip hazard and driveway boards so popular?  Because they’re lightweight, easy to deploy without heavy lifting equipment and machinery, and they are easy to see… 

 Here’s a snippet of what our Trenchless article covers:

‘The comparable data (1) of our three CSP LowPro Trench sizes shows the difference.  The 1,125 mm by 1,125 mm LowPro 11/11 weighs just 26 kg and has a load capacity of 500 kg;  a 20 mm steel plate of the same size weighs in at 200 kg.  The 1,200 mm by 800 mm LowPro 12/8 weighs 17 kg with load capacity of 2 Tonne distributed weight, compared with the 151 kg steel plate equivalent, and the 42 kg 1,500 mm by 1,000 mm LowPro with the load capacity to support one wheel of a vehicle up to 3.5 Tonne or 400 kg pedestrian weight, compared with the 236 kg steel plate equivalent.
“Our most popular trench cover is the LowPro 12/8,” says Mr Neil Cuthbert from Civil Safety Products.  “Its innovative flexi-edge allows safe installation and protection over trip hazards, pedestrian walkway concrete damage areas, and small pits.  It’s no slouch in area capacity either, as it is specifically designed to cover a 700 mm trench.  The LowPro 15/10 will safely span a hole measuring up to 900 mm by 1,200 mm – and they’re shock resistant.”
Temporary trench covers also vary in durability, so Civil Safety Products says there is wisdom in being wary of cheap alternatives. Oxford Plastic products are gaining in popularity, proven to be reliable, sturdy and practical, and doing well when Work Health and Safety compliance is concerned.’

(1. Steel plate weight data sourced from engineeringtoolbox.com, based on steel density of 7,850m3)

FIND OUT MORE in Trenchless Australasia_March_2018_CSP PDF  Click Here

PLUS  –  See the Benefits of Safegate Barrier by clicking here

AND REMEMBER – Our LowPro Covers are entirely reusable, and can be stacked, stored and transported by no more than two people and a ute!   

  

 

 

Innovative UK designed & manufactured products with compliance to AS3996 and the WHS Act (2012)

 

PLACE YOUR ORDER TODAY    –  Stock Available  & Australia-wide Delivery

CLICK HERE & WATCH OUR LowPro Range VIDEO: 

There’s a civil safety solution in our Commercial-Grade, Australian Standard Safety Products to suit almost any situation at Civil Safety Products – and we invite you to see our full range in our downloadable Products Brochure.

FIND OUT MORE
– How to place an order
– Applications Chart for these products
– Contact Us 

Like Us on Facebook

Reduce Your Risk with the
Best Civil Safety Products on the Australian Market
TODAY

 

Civil Safety Products is also the leading Australian stockist of Safety Ramps, Safety Barriers, Temporary Manhole Covers, Road Plates, Portable Wheelchair Access Ramps / Disabled Access Ramps, Pedestrian Safety Measures, Kerb Ramps / Gutter Ramps, Streetworks Covers, and more (from Oxford Plastic Systems in the UK).

/0 Comments/by